At Bronmetal we supply Cu+Al bimetal strips.
Bimetal strips consist of rolled welded sheets of copper and aluminium, supplied in roll format.
Available in a variety of thicknesses and widths.
Ask our sales department.
At Bronmetal we supply Cu+Al bimetal strips.
Bimetal strips consist of rolled welded sheets of copper and aluminium, supplied in roll format.
Available in a variety of thicknesses and widths.
Ask our sales department.
Aluminium | AL 99.5 material nº. 3.0255 according to DIN 17007 Alloy 1050A according to Int. Reg. Record |
---|---|
Copper | E1-CU58 material no. 2.0065 according to DIN 1787 CU/a1 according to NFA 53-100 |
Density | 4,6 | g/cm3 |
---|---|---|
Specific electrical conductivity | 41,9 | m/(Ohm*mm2) |
Specific electrical resistance | 0,0239 | Ohm*mm2/m |
Required cross section towards Cu | 1,41 | |
Required cross section towards Al | 0,906 | |
Thermal conductivity | 265 | W/(m+K) |
Lin. Thermal expansion coefficient | 21,8 | 10-6/K |
Modulus of elasticity | 81 | kN/mm2 |
Tensile Strength | 130-180 | N/mm2 |