Inicio / Copper Alloy / Copper alloy flat bar / rectangular bar

Copper alloy flat bar / rectangular bar

Copper alloy rectangular flat bars. Available in different sizes.

Data sheet: Copper alloy flat bar / rectangular bar

The alloyed copper bars that we manufacture at Bronmetal are subject to the EN 13601 Standard that applies to products made of copper and copper alloys. Specifically to copper bars and wires for general electrical uses. Combinations of copper with other elements improve the performance of the bars in specific applications. Depending on the type of alloy, the copper bar will have certain characteristics and specifications, but, in general terms, it improves corrosion resistance and has high electrical and thermal conductivity.

The choice of the type of alloyed copper strip will depend on the type of application and the desired performance requirements. In the technical data sheet section you can consult the details of the chemical compositions for each of the alloys, as well as the technical characteristics, equivalences and nominal thickness tolerances for the entire range of thicknesses available.

Material Designation		Designations												Density g/cm³
Symbolic	Numerical	Element	Cu	Be	Co	Cr	Fe	Mn	Ni	Pb	Si	Zr	Total Others	approx.
CuBe2	CW101C	min.	Rest	1,8	-	-	-	-	-	-	-	-	-	8,3
CuBe2	CW101C	max.	-	2,1	0,3	-	0,2	-	0,3	-	-	-	0,5	8,3
CuCo1Ni1Be	CW103C	min.	Rest	0,4	0,8	-	-	-	0,8	-	-	-	-	8,8
CuCo1Ni1Be	CW103C	max.	-	0,7	1,3	-	0,2	-	1,3	-	-	-	0,5	8,8
CuCo2Be	CW104C	min.	Rest	0,4	2,0	-	-	-	-	-	-	-	-	8,8
CuCo2Be	CW104C	max.	-	0,7	2,8	-	0,2	-	0,3	-	-	-	0,5	8,8
CuCr1	CW105C	min.	Rest	-	-	0,5	-	-	-	-	-	-	-	8,9
CuCr1	CW105C	max.	-	-	-	1,2	0,08	-	-	-	0,1	-	0,2	8,9
CuCr1Zr	CW106C	min.	Rest	-	-	0,5	-	-	-	-	-	0,03	-	8,9
CuCr1Zr	CW106C	max.	-	-	-	1,2	0,08	-	-	-	0,1	0,3	0,2	8,9
CuNi1Si	CW109C	min.	Rest	-	-	-	-	-	1,0	-	0,4	-	-	8,8
CuNi1Si	CW109C	max.	-	-	-	-	0,2	0,1	1,6	0,02	0,7	-	0,3	8,8
CuNi2Be	CW110C	min.	Rest	0,2		-	-	-	1,4	-	-	-	-	8,8
CuNi2Be	CW110C	max.	-	0,6	0,3	-	0,2	-	2,4	-	-	-	0,5	8,8
CuNi2Si	CW111C	min.	Rest	-	-	-	-	-	1,6	-	0,4	-	-	8,8
CuNi2Si	CW111C	max.	-	-	-	-	0,2	0,1	2,5	0,02	0,8	-	0,3	8,8
CuZr	CW120C	min.	Rest	-	-	-	-	-	-	-	-	0,1	-	8,9
CuZr	CW120C	max.	-	-	-	-	-	-	-	-	-	0,2	0,1	8,9

EN		DIN		ASTM	BS	JIS	SN	COMMERCIAL DENOMINATIONS
Symbolic	Numerical	Symbolic	Numerical	ASTM	BS	JIS	SN	COMMERCIAL DENOMINATIONS
CuBe1,7	CW100C	CuBe1,7	2.1245	C17000	CB101	C1700	-	-
CuBe2	CW101C	CuBe2	2.1247	C17200	-	C1720	-	Elmedur B2
								Mallory 73
								CuBe
CuCo2Be	CW104C	CuCo2Be	2.1285	C17500	C112	-	-	Elmedur HA
								CB4
								Mallory 100
								Class 3
								NS
CuNi2Be	CW110C	CuNi2Be	2.0850	C17510	-	-	-	-
CuCo1Ni1Be	CW103C	-	-	-	-	-	-	Elmedur HA
								CB4
								Mallory 100
								Class 3
								NS
CuCr1Zr	CW106C	CuCr1Zr	2.1293	C18150	CC102	-	-	Elmedur X
								CRM16
								Mallory 328
								Class 2
								CCS/Z
CuZr	CW120C	CuZr	2.1580	C15000	-	-	-	-
-	-	-	-	C18000	-	-	CuNi2SiCr	Ampco 940
								NS5
								Elbrodur D
CuNi2Si	CW111C	CuNi2Si	2.0855	C64700	-	-	-	-
CuNi3Si	CW112C	CuNi3Si	2.0857	C70250	-	-	-	-
CuNi10Fe1Mn	CW352H	CuNi10Fe1Mn	2.0872	C70600	CN102	C7060	-	-
CuNi30Mn1Fe	CW354H	CuNi30Mn1Fe	2.0882	C71500	CN107	C7150	-	-
TuCo 80/20								30w3
TuCo 75/25								10w3
CuNi12Zn29	CW405J	-	-	C76200	-	-	-	-
CuNi18Zn27	CW410J	CuNi18Zn27	2.0742	C77000	NS107	C7701	-	-
CuNi7Zn39Pb3Mn2	CW400J	-	-	C79800	-	-	-	-
CuNi10Zn42Pb2	CW402J	-	-	C79620	NS101	-	CuNi10Zn42Pb2	-
CuNi12Zn24	CW403J	CuNi12Zn24	2.0730	C75700	NS104	-	CuNi12Zn24	-
CuNi12Zn25Pb1	CW404J	-	-	C79200	-	-	CuNi12Zn25Pb	-
CuNi12Zn30Pb1	CW406J	CuNi12Zn30Pb1	2.0780	C79300	-	-	-	-
CuNi12Zn38Mn5Pb2	CW407J	-	-	C79860	-	-	-	-
CuNi18Zn19Pb1	CW408J	CuNi18Zn19Pb1	2.0790	C76300	NS113	-	-	-

Designations			Nominal dimension of cross section			Tensile Strength	Yield Limit at 0.2%	Elongation	Hardness
Material		Metallurgical State	profile^a	rectangular sheet bar thickness mm		R_mN/mm²	R_p0.2N/mm²	A %	HB	HV
Symbol	Number	Metallurgical State	profile^a	from	up to and including	min.	approx.	approx.	min.	min.
CuCr1 CuCr1Zr	CW105C CW106C	M	All	All		Rough Manufacture

		R200^e	-	3	60	200	(60)	(30)	-	-
		H065^e	-	3	60	-	-	-	65	70

		R360^c	-	3	30	360	(250)	(15)	-	-
		H105^c	-	3	30	-		-	105	110

		R420^d	-	3	30	420	(350)	(8)	-	-
		H120^d	-	3	30	-	-	-	120	125

CuNi1Si	CW109C	M	All	All		Rough Manufacture

		R250^e	-	3	60	250	(100)	(35)	-	-
		H060^e	-	3	60	-	-	-	60	65

		R380^b	-	3	60	380	(250)	(8)	-	-
		H110^b	-	3	60	-	-	-	110	115

		R420^c	-	3	30	420	(260)	(15)	-	-
		H120^c	-	3	30	-	-	-	120	125

		R560^d	-	3	30	560	(520)	(10)	-	-
		H170^d	-	3	30	-	-	-	170	180
CuNi2Si	CW111C	M	All	All		Rough Manufacture

		R280^e	-	3	60	280	(100)	(30)	-	-
		H070^e	-	3	60	-	-	-	70	75

		R380^b	-	3	60	380	(260)	(6)	-	-
		H120^b	-	3	60	-	-	-	120	125

		R460^c	-	3	30	460	(300)	(12)	-	-
		H140^c	-	3	30	-	-	-	140	145

		R600^d	-	3	30	600	(480)	(8)	-	-
		H180^d	-	3	30	-	-	-	180	190
CuZr	CW120C	M	All	All		Rough Manufacture

		R200^e	-	3	60	200	(80)	(30)	-	-
		H050^e	-	3	60	-	-	-	50	50

		R300^d	-	3	30	300	(250)	(20)	-	-
		H110^d	-	3	30	-	-	-	110	115

		R350^d	-	3	10	350	(300)	(18)	-	-
		H130^d	-	3	10	-	-	-	130	135
CuBe2	CW101C	M	All	All		Rough Manufacture

		R410	-	3	60	410	(190)	(40)	-	-
		H085	-	3	60	-	-	-	85	90

		R580^b	-	3	60	580	(520)	(14)	-	-
		H160^b	-	3	60	-	-	-	160	170

		R1130^c	-	3	30	1130	(950)	(6)	-	-
		H330c	-	3	30	-	-	-	330	350

		R1200^d	-	3	30	1200	(1050)	(6)	-	-
		H340^d	-	3	30	-	-	-	340	360
CuCo1Ni1Be CuCo2Be CuNi2Be	CW103C CW104C CW110C	M	All	All		Rough Manufacture

		R240	-	3	60	240	(130)	(25)	-	-
		H055	-	3	60	-	-	-	55	60

		R440^b	-	3	60	440	(340)	(12)	-	-
		H100^b	-	3	60	-	-	-	100	105

		R680^c	-	3	30	680	(600)	(15)	-	-
		H220^c	-	3	30	-	-	-	220	230

		R750^d	-	3	30	750	(700)	(15)	-	-
		H240^d	-	3	30	-	-	-	240	250
^a For these profiles, mechanical characteristics will depend on the shape and dimensions of the profile and will be subject to agreement between client and supplier.
^b Solution heat treatment cold rolling.
^c Solution heat treatment cold rolling and hardening
^d Solution heat treatment cold rolling and precipitation hardening in the factory.
^e Solucion heat treated
NOTE 1 - The values in brackets are not requisites for this norm, they are given only for informative purposes.
NOTE 2 - 1N/mm² is equivalent to 1 MPa

Nominal Width		Width Tolerance	Tolerance of nominal thickness for the range of thicknesses
Nominal Width			from 3 up to and inc. 6	greater than 6, up to and inc. 10	greater than 10, up to and inc. 18	greater than 18, up to and inc. 30	greater than 30, up to and inc. 50	greater than 50, up to and inc. 60
Greater than	Up to and including
Greater than	Up to and including								Tolerance class A
6^a	18	± 0,27	± 0,18	± 0,22	± 0,27	-	-	-
18	30	± 0,33	± 0,18	± 0,22	± 0,27	± 0,33	-	-
30	50	± 0,62	± 0,22	± 0,27	± 0,33	± 0,45	± 0,62	-
50	80	± 1,20	± 0,27	± 0,33	± 0,45	± 0,52	± 0,74	± 1,00
80	120	± 2,20	± 0,33	± 0,45	± 0,52	± 0,74	± 1,00	± 1,20
Tolerance class B
6^a	18	± 0,15	± 0,10	± 0,12	± 0,15	-	-	-
18	30	± 0,22	± 0,10	± 0,12	± 0,15	± 0,22	-	-
30	50	± 0,30	± 0,13	± 0,15	± 0,18	± 0,22	± 0,30	-
50	80	± 0,37	± 0,16	± 0,18	± 0,22	± 0,30	± 0,37	-
80	120	± 0,45	± 0,18	± 0,22	± 0,27	± 0,35	± 0,45	-
^a including 6.

Documentation download

Title

Other languages

Type

Created

ELECTRICAL SECTOR. Bronmetal

Type Catalogue

Created 03/04/2023

Copper Flat Bars (inches)

Type Technical sheets

Created 27/02/2023

Copper Flat Bars

Type Technical sheets

Created 16/03/2020

Copper alloy flat bar / rectangular bar

Data sheet: Copper alloy flat bar / rectangular bar

Documentation download

Bare copper cable

Flat copper bar / rectangular bar

Copper alloy bars

Flat aluminium bar / rectangular bar